Episode 14 - Breaking Down Plywood, Finishing Drawer Boxes, T-Track On Workbenches & MUCH More!

Support us on Patreon: https://www.patreon.com/woodshoplife Guys Questions 1) I've been enjoying the podcast and all the content you produce on your YouTube and Instagram accounts. I wanted to ask a question about plywood. I'm wondering what's the best way to make sure the that plywood is square before breaking it down to more manageable pieces for the table saw? I know you shouldn't really trust that the factory edges are square so I'm just a little confused on how you get the sheet square if you don't have a reliable edge to reference off. I don't have a track saw in my tool collection yet so I'm using a circular saw and a straight edge. I might be over thinking this and confusing myself but if you can provide some insight or a good way of accomplishing this task that would be awesome. Thanks for the great info you guys provide! 2) What's your favorite wood species to work with and why? Seans Questions 1) Hey guys, podcast has been great but it feels like forever since there was a question about finishing :) My question is about what kinds of finishes you guys use on drawer boxes. Specifically, for something like a kitchen cabinet, a shop cabinet, and a drawer box in a furniture piece like a dresser or a nightstand. I know there are concerns about off-gassing of oil based finishes inside cabinets. Curious about what you recommend. 2) Give me a 101 level primer in getting started in spraying finishes. What type of machine should I buy and what kind of finishes/paint should I spray? Huys Questions 1) Huy mentioned last week some tips regarding wood movement and the process of keeping a table top flat, and that the 2 most important aspects were to allow the wood to acclimate to your shop, and to properly mill the wood. I was wondering if you guys could speak a bit more to that. For example, how long do you allow the wood to acclimate to your shop? And are there any tips you'd be willing to share, or give examples of your process in regards to milling? How long is it okay to wait after the first milling to take it down to final dimensions? My shop currently is a non-insulated detached garage outside Chicago, where weather/humidity can change rapidly from one day to the next. I really value the work you guys do and the information you give out each episode. Thank you for getting right into the Q&A and mostly for taking the time to share your skills and knowledge with those of us still learning. 2) Question about workbench tops. I’m planning to build a workbench in the near future. I’ve seen plenty of dog holes and understand the basic pros and cons but I’m considering a t-track top. Your thoughts on this are appreciated.